PTH-100
Specifications
| Model | PTH-100 |
| Mode | Non-maintained |
| Light Source | 1.0W High Power LED |
| Lamp Wattage | 1.0W |
| Rated Lumen Output | 68 lm |
| Battery | 2.4V 1.6AH Ni-MH |
| Charger | Constant current |
| Battery Protection | Low voltage cut-off to prevent over discharge |
| Monitoring | Red LED “ON” indicates charging Equipped with push test switch to simulate power failure |
| Back Up Duration | 3 hours |
| Recharge Time | 16-24 hours |
| Input Voltage | 240V +/- 10% 50Hz |
| Input Power | 1.96W |
| Weight | 260 grams |
| Housing |
Injected moulded fire retardant, UV stabilize ABS Housing |
| Mounting | Surface mount |
| Dimensions ( mm ) | 100mm (Dia) x 73mm (H) |
| Ingress Protection | IP-20 |
| Operating Temperature | 0℃ – 65℃ |
| Compliance | MS2687 : 2018, MS619-2-22:2005, MS IEC 60598-1: 2021 |
